Page Loading...
Layout Table~~~~361~361~~
New Layout Table~~~~361~402~~
Spacer~~~~361~403~~
New Layout Table~~~~361~384~~
WEST HEADER~West - Temperature & Process Controllers~~~361~547~~
New Layout Table~~~~361~557~~
West 2300 1/32DIN (24 x 48mm) Temperature/ Process Controller [90..264Vac]~WEST Instruments 2300 Temperature Controller - Available with Green or Red display the West 2300 comes with pre-configured PID or manual set-up with pre-tune. The controller can operate as a single or dual (front panel selected) setpoint controller and is configurable between Relay or SSR (solid state relay) control output.

Other 2300 Models :  
~WEST Instruments - Available with Green or Red display the West 2300 comes with pre-configured PID or manual set-up with pre-tune. The controller can operate as a single or dual (front panel selected) setpoint controller. The West 2300 is configurable between Relay or SSR (solid state relay) control output.
  • Alarm - (Configurable) Process High, Process Low, SP Deviation, Band.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Ouput Relay - Contacts 2 Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 10V into 500R min.
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, (Modbus RTU)

    Other 2300 Models :  

    Download Datasheet  West 2300.pdf

    ~{please select model}|27062|N2300-1200 Control O/P (Relay) + Alarm(SSR)|27063|N2300-1220 Control O/P (Relay) + Alarm(SSR) + RS485|27064|N2300-2100 Control O/P (SSR) + Alarm(Relay)|27065|N2300-2120 Control O/P (SSR) + Alarm(Relay) + RS485|28019|~361~546~instrument west, wset instruments, west control, west ltd, west instrumentation, west meter,gulton, gulton instruments, mark iv, west product, west control inc, west industrial system, west instrument digital temperature controller, controller scr temperature, circuit controller temperature, controller humidity temperature, controller abb temperature, pid temperature controller, electronic temperature controller, pid, pid control, pid controller, pid tuning, pid algorithm, pid symptom, loop pid, pid symbol, adaptive, pid, algorithm control pid, controller pid tuning, pid software, control controller pid, auto pid tuning, control pid software, pid setup, transforms, controller pid tutoria, digital pid, pid treatmen, pid tune, pid temperature control, autotuning pid, controller design pid, control pid theory, basics pid, boiler pid, elf, elf controller, elf temperature controller, mc30, mc35, 1070, 2070, 1071, 2071, 1072, 2072, 2072A, 1068, 2068, 1073, 2073,3000, 3100, 3200, 3300, 3400, 3500, 3510, 2300, 6100, 6120, 6500, 6600, 8000, 8100, 8200, 4100, 4200, west mc30, west mc35,west 1070, west 2070, west 1071, west 2071, west 1072, west 2072, west 2072A,west 1068, west 2068, west 1073, west 2073, west 3000, west 3100, west 3200, west 3300, west 3400, west 3500, west 3510, west 2300, west 6100, west 6120, west 6500, west 6600, west 8000, west 8100, west 8200, west 4100, west 4200~
Spacer~~~~361~673~~
Spacer~~~~361~672~~
New Layout Table~~~~361~556~~
West 6100+ 1/16DIN (48 x 48mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 6100 Temperature Controller - West's best selling controller with a new look. Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. There aren't many jobs this little controller can't cope with. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.

Other P6100 Models :  
~WEST Instruments 6100 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The West 6100 featured is available with Relay, SSR (solid state relay) or a Triac control output.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 6100+.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retrans + RS485|28020|~361~536~instrument west, wset instruments, west control, west ltd, west instrumentation, west meter,gulton, gulton instruments, mark iv, west product, west control inc, west industrial system, west instrument digital temperature controller, controller scr temperature, circuit controller temperature, controller humidity temperature, controller abb temperature, pid temperature controller, electronic temperature controller, pid, pid control, pid controller, pid tuning, pid algorithm, pid symptom, loop pid, pid symbol, adaptive, pid, algorithm control pid, controller pid tuning, pid software, control controller pid, auto pid tuning, control pid software, pid setup, transforms, controller pid tutoria, digital pid, pid treatmen, pid tune, pid temperature control, autotuning pid, controller design pid, control pid theory, basics pid, boiler pid, elf, elf controller, elf temperature controller, mc30, mc35, 1070, 2070, 1071, 2071, 1072, 2072, 2072A, 1068, 2068, 1073, 2073,3000, 3100, 3200, 3300, 3400, 3500, 3510, 2300, 6100, 6120, 6500, 6600, 8000, 8100, 8200, 4100, 4200, west mc30, west mc35,west 1070, west 2070, west 1071, west 2071, west 1072, west 2072, west 2072A,west 1068, west 2068, west 1073, west 2073, west 3000, west 3100, west 3200, west 3300, west 3400, west 3500, west 3510, west 2300, west 6100, west 6120, west 6500, west 6600, west 8000, west 8100, west 8200, west 4100, west 4200~
West 6120 1/16DIN (48 x 48mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 6120 Temperature Controller - Simplified version of West's 6100 Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.

Other 6120 Models :  
~WEST Instruments 6120 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 6120.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retrans + RS485|28021|~361~566~instrument west, wset instruments, west control, west ltd, west instrumentation, west meter,gulton, gulton instruments, mark iv, west product, west control inc, west industrial system, west instrument digital temperature controller, controller scr temperature, circuit controller temperature, controller humidity temperature, controller abb temperature, pid temperature controller, electronic temperature controller, pid, pid control, pid controller, pid tuning, pid algorithm, pid symptom, loop pid, pid symbol, adaptive, pid, algorithm control pid, controller pid tuning, pid software, control controller pid, auto pid tuning, control pid software, pid setup, transforms, controller pid tutoria, digital pid, pid treatmen, pid tune, pid temperature control, autotuning pid, controller design pid, control pid theory, basics pid, boiler pid, elf, elf controller, elf temperature controller, mc30, mc35, 1070, 2070, 1071, 2071, 1072, 2072, 2072A, 1068, 2068, 1073, 2073,3000, 3100, 3200, 3300, 3400, 3500, 3510, 2300, 6100, 6120, 6500, 6600, 8000, 8100, 8200, 4100, 4200, west mc30, west mc35,west 1070, west 2070, west 1071, west 2071, west 1072, west 2072, west 2072A,west 1068, west 2068, west 1073, west 2073, west 3000, west 3100, west 3200, west 3300, west 3400, west 3500, west 3510, west 2300, west 6100, west 6120, west 6500, west 6600, west 8000, west 8100, west 8200, west 4100, west 4200~
West 6500 1/16DIN (48 x 48mm) Simple Temperature Controller [90..264Vac]~WEST Instruments 6500 Temperature Controller - A simple to use Temperature Controller that requires no setting up. Ideally suited to the Packaging Industries whether for form, fill and seal, bag seal or shrink wrap. The model featured is available with Relay or SSR (solid state relay) control output. Other 6500 Models :  
~WEST Instruments 6500 Temperature Controller
- A simple to use Temperature Controller that requires no setting up. Ideally suited to the Packaging Industries whether for form, fill and seal, bag seal or shrink wrap.
  • Alarm (Option) - (Configurable) Process High, Process Low, SP Deviation, Band,.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, T, & N.
  • RTD - 3 Wire PT100
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR Output > 4.2V into 1K min.

Download Datasheet  West 6500.pdf

~{please select model}|27068|Control O/P only|27069|Control O/P + Alarm Relay|28022|~361~568~~
West 6600 1/16DIN (48 x 48mm) Plastics Temperature Controller [90..264Vac]~WEST Instruments 6600 Temperature Controller - Specially designed for the plastics industry, the 6600 can display & alarm on the current in your load. The 6600 is available with Relay or SSR (solid state relay) control output.

Other 6600 Models :  
~WEST Instruments 6600 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection) or Heater Current (requires CT)

Download Datasheet  West 6600.pdf

~{please select model}|27068|Control O/P only|27069|Control O/P + Alarm/Cool Relay|27390|Control O/P + 2 Alarm/Cool Relays|27391|Control O/P + DSP or Heater Curent|27392|Control O/P + Alarm/Cool + DSP or Heater Curent|27393|Control O/P + 2 Alarms/Cool + DSP or Heater Curent|28023|~361~542~~
West 8100 1/8DIN (48 x 96mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 8100 Temperature Controller - Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. select from below for other models. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.

 Other 8100 Models :  
~WEST Instruments 8100 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 8100.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retrans + RS485|28024|~361~537~~
West 8200 1/8DIN (48 x 96mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 8200 Temperature Controller - Full PID with Fuzzy Logic. Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. select from below for other models. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.Other 8200 Models :  
~WEST Instruments 8200 Temperature Controller
- Full PID with Fuzzy Logic. Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 8200.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retra360|28025|~361~544~~
West 8600 1/8DIN (48 x 48mm) Plastics Temperature Controller [90..264Vac]~WEST Instruments 8600 Temperature Controller - Specially designed for the plastics industry, the 8600 can display & alarm on the current in your load. The 8600 is available with Relay or SSR (solid state relay) control output.

Other 8600 Models :  
~WEST Instruments 8600 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection) or Heater Current (requires CT)

Download Datasheet  West 8600.pdf

~{please select model}|27068|Control O/P only|27069|Control O/P + Alarm/Cool Relay|27390|Control O/P + 2 Alarm/Cool Relays|27391|Control O/P + DSP or Heater Curent|27392|Control O/P + Alarm/Cool + DSP or Heater Curent|27393|Control O/P + 2 Alarms/Cool + DSP or Heater Curent|28026|~361~668~~
West 8800 1/8DIN (48 x 96mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 8800 Process/Temperature Controller

The 8800 is a new advanced controller from West, designed specifically to ensure ease of use in demanding applications.
  • Front Comms Port and Configurator Software
  • Two or Three Analogue Inputs
  • Valve Control with/without Feedback
  • Fast Sample Rate (100ms)
  • Maintenance Manager and error list
  • Self-Tuning to the setpoint without oscillation
  • High visibility display shows plain text or bargraphs
~WEST Instruments 8800 Process/Temperature Controller
Applications
  • Furnaces,ovens, burners and boilers
  • Plastics processing
  • Driers
  • Heat treatment plants
  • Thermal oil systems

Main Attributes
  • Valve controller with position feedback and DAC valve heath monitoring
  • Two freely configurable analogue outputs, e.g. as process value output
  • Customer-specific Linearization for all sensors
  • 3-point controller for water, fan and oil cooling
  • Built-in transmitter power supply option
  • Rate of change monitoring (/min) and discriminator time
  • Splash-water proof front (IP 65)
  • Screw terminals
Download the brochure for full technical details about this controller.West 8800.pdf

~{please select model}|27055|Controller (4 Relays)|27056|Controller (4 Relays+ RS422/485)|27072|Controller (3 Relays + mA/Logic)|27073|Controller (3 Relays + mA/Logic + RS422/485)|27074|Controller (2 Relays + 2 mA/Logic)|27075|Controller (2 Relays + 2 mA/Logic + RS422/485))|27102|~361~1160~~
West 4100 1/4DIN (96 x 96mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 4100 Temperature Controller - Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. select from below for other models. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.

Other 4100 Models :  
~WEST Instruments 4100 Temperature Controller
- Full PID with Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 4100.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retrans + RS485|28027|~361~570~~
West 4200 1/4DIN (96 x 96mm) Temperature/Process Controller [90..264Vac]~WEST Instruments 4200 Temperature Controller - Full PID with Fuzzy Logic. Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. select from below for other models. The model featured is available with Relay, SSR (solid state relay) or a Triac control output. Select from below for other models.Other 4200 Models :  
~WEST Instruments 4200 Temperature Controller
- Full PID with Fuzzy Logic. Pre-tune, Self-tune, Manual Tuning, or On-Off control. Heat only or heat & cool.
  • Auto/Manual - Selectable from front panel, with bumpless transfer.
  • Alarm 1 & 2 (Options) - (Configurable) Process High, Process Low, SP Deviation, Band, Logical OR and Hysteresis. Also 1 Loop Alarm.
  • Front Panel Protection - IEC IP66 (Behind panel protection is IP20).
  • Approvals and Certification - CE, UL & Ulc
    Configurable Input
  • Thermocouple - J, K, R, S, T, B, L, & N.
  • RTD - 3 Wire PT100
  • DC Linear - 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, decimal point selectable.
    Outputs & Options
  • Control & Alarm Relays - Contacts SPDT 2Amp resistive at 240V AC,
  • SSR (Solid State Relay) Drive Output > 4.2V/1K min.
  • Triac - 1 Amp @ 20-280Vac
  • Communications - 2 Wire RS485, 1200 to 9600 Baud, West ASCII (Modbus Optional).
  • Dual Setpoint (front panel or remote selection)
    Dual setpoint Module M9610 W03 must be ordered separately Cannot be used when RS485 is fitted

Download Datasheet  West 4200.pdf

~{please select model}|27055|Control O/P only|27056|Control O/P + 1 Alarm|27072|Control O/P + 2 Alarms|27073|Control O/P + RS485|27074|Control O/P + 1 Alarm + RS485|27075|Control O/P + 2 Alarms + RS485|27102|Control O/P + Retransmission|27103|Control O/P + 1 Alarm + Retrans|27104|Control O/P + 1 Alarm + Retrans + RS485|28028|~361~569~~
Menu Page | Toolbar Page |
Frameset Page | Index Page | Table of Contents