The 1/16 DIN CAL Controls 9400 Series temperature controller is a dual display, dual output, miniature controller with PID control strategy. The CAL Controls 9400 Series temperature controller provides the user with the benefits of an easy to use ‘autotune' program (so that you don't need to understand PID to set-up a controller).
Temperature control can be optimized with a single shot autotune either on initial warm-up or at setpoint. The CAL Controls CAL9400 Series temperature controller features a second setpoint that can be configured in a variety of alarm modes or PID Heat-Cool strategy. A programmer offers a single ramp to setpoint with a choice of timed soak period before switching off the output.
The CAL Controls 9400 Series temperature controller provides control of non-temperature processes by the provision of linear input ranges and scaling in commonly used engineering units. Each CAL Controls CAL9400 Series temperature controller has the option to add a communications board so that you can connect them to a PC. The best way to use the CAL Controls CAL9400 Series temperature controller with a PC is with CAL Control's data-logging and chart-recorder software CALgrafix.
Specification Product Category: Single Loop controller Dimensions and size: 48mm x 48mm x 107mm (HxWxD), 1/16 DIN Primary Input Type: Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2 wire. Linear: 0 to 50mV Other Inputs: None Output Function: Heat, Cool, Alarm Output Type: Relay (rly1 2A, rly2 1A resistive), SSd ( 5Vdc +0/-15% 15mA non-isolated) Max. Number of Outputs: 2 Control Type: PID heat only, PID heat cool , ON/OFF Power Supply:
50–60Hz +/- 10% maximum permitted fluctuation
Communications: RS232 & RS485 Modbus RTU Panel Sealing: IP66 Certifications: CE, UL, CSA Other Functions:Up to 31 prog x 126 segment programmer (fixed memory of 351 bytes)dAC (derivative approach control)dAC (derivative approach control), Single ramp soak program Software Tools: CALgrafix – configuration and datalogging software