ScopeMeter® 123/S : As simple as one-two-three
- Dual-input 40 MHz or 20 MHz digital oscilloscope
- Two 5,000 counts True RMS digital multimeters
- Automatic measurements
- A dual-input TrendPlot™ recorder
- Connect-and-View™ trigger simplicity for hands-off operation
- Shielded test leads for oscilloscope, voltage, resistance and continuity measurements
- Up to 7 hours battery operation
- 600 V CAT III safety certified
- Optically-isolated interface for PC connection
- Rugged, compact case
In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The ScopeMeter 123/S meets today’s need of simultaneously measuring and checking waveforms. The unique Connect-and-View™ triggering automatically displays stable waveforms of virtually any signal. It really is as easy as one-two-three!
A three-in-one tool
Dual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously
The ScopeMeter 123/S combines a 40 or 20 MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 123/S is the only tool you’ll need.
One test lead measures all
Check the starting capacitor of a motor using the ScopeMeter 123/S
High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.
The confidence to do a better job
Open the measure menu and select from 26 scope- and meter-measurements
Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the ScopeMeter 123/S has Connect-and-View automatic triggering.You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.
Battery powered mobility
Specification Specifications Oscilloscope bandwidth 20 MHz Dual input true RMS meter VDC, VAC, VAC + VDC, Ohms,Continuity, Diode-test Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset TrendPlot recording Automatic vertical scaling and time compression
Display the actual, MIN, MAX and AVG reading
Real-time sample rate 25 MS/s Equivalent sampling rate Up to 1.25 GS/s Inputs and digitizers 2 Timebase range 10 ns - 1 min/div Input sensitivity 5 mV - 500 V/div Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Video, External Glitch capture 40 ns Scope measurements Automatic measurements: 26 (all instruments) Maximum record length 512 min/max pts per input Memory 10 screens and setups Environmental Specifications Operating temperature 0°C to 50°C Storage temperature -20°C to +60°C Operating altitude 3,000 m Safety Specifications Electrical safety 600V CAT III (EN61010-1) Mechanical and General Specifications Size 232 x 115 x 50 mm Weight 1.2 kg Warranty 3-years on main instrument
1-year on accessories
Battery life 7 hrs using NiMH RS232/USB interface Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC