Welcome to Contral Instrument Services

Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscope

More Views

Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscope

Excl. VAT: £1,380.00 Incl. VAT: £1,656.00
Contral - Official Distributor
1380

25 MS/s / 1.25 GS/s sampling rate, 40 MHz dual input scope and multimeter for electrical, electro-mechanical applications.





  • The compact ScopeMeter® 124/S is the rugged solution for industrial troubleshooting and installation applications. It’s a truly integrated test tool, with oscilloscope, multimeter and 'paperless' recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems.




What's included with the Fluke 124B



  • Fluke 124B Hand-Held Oscilloscope

  • Shielded Test Leads with Black Ground Leads

  • Test Lead Black (for Grounding)

  • Hook Clips (red, blue)

  • Banana-to-BNC Adapters (black, x1)

  • 10:1 Voltage Probe

  • USB Angled Adapter

  • WiFi USB Adapter*

  • Switch Mode Power Supply, Adapter/Battery Charger

  • Rechargeable Li-ion Battery Pack


Additional Items included with the Fluke 124B/S



  • Soft Carrying Case

  • Magnetic Hanger

  • FlukeView® ScopeMeter® Software for Windows®

  • Screen Protector


* Required Fields

Excl. VAT: £1,380.00 Incl. VAT: £1,656.00
Free shipping
Description

Details

ScopeMeter® 120 Series : 

In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down, are best displayed with an oscilloscope. The ScopeMeter 124/S meets today’s need of simultaneously measuring and checking waveforms. The unique Connect-and-View™ triggering automatically displays stable waveforms of virtually any signal. It really is as easy as one-two-three!

A three-in-one tool


Dual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously

The ScopeMeter 124/S combines a 40 or 20 MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 124/S is the only tool you’ll need.

One test lead measures all


Check the starting capacitor of a motor using the ScopeMeter 124/S

High frequency waveform-, meter-, capacitance- and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.

The confidence to do a better job


Open the measure menu and select from 26 scope- and meter-measurements

Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the ScopeMeter 124/S has Connect-and-View automatic triggering.You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.

Battery powered mobility

Up to seven hours of battery operation frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.

Floating measurements, safety certified


Connect-and-View captures even the most complex motor drive signals

While conventional oscilloscopes can only make measurements referenced to power line ground, the ScopeMeter 124/S makes floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 124/S and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or USB interface, the ScopeMeter 124/S can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.

Connect-and-View™ triggering for an instant, stable display


Connect-and-View captures even the most complex motor drive signals

Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal – including motor drive and control signals – without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.

Use TrendPlot™ to help find intermittents, fast


Cursors and zoom help you analyze the captured TrendPlot

The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it – your Fluke ScopeMeter test tool will. In this “paperless” recorder mode, you can plot the minimum and maximum peak values and average over time – up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase – with time and date stamp – to help lead you to the cause of those faults quickly.

 

Specifications

Additional Information

Specification
  • Specifications
    Oscilloscope Bandwidth 40 MHz
    Dual Input True RMS Meter VDC, VAC, VAC + VDC, Ohms,Continuity, Diode-test Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
    TrendPlot Recording Automatic vertical scaling and time compression
    Display the actual, MIN, MAX and AVG reading
    Cursors ΔT, 1/ΔT, V, ΔV, rise- and fall time
    Real-time Sample Rate 25 MS/s
    Equivalent Sampling Rate Up to 2.5 GS/s
    Inputs and Digitizers 2
    Timebase Range 20 ns - 1 min/div
    Input Sensitivity 5 mV - 500 V/div
    Trigger Types Connect-and-View™, Free Run, Single Shot, Edge, Video, External
    Glitch Capture 40 ns
    Scope Measurements Automatic measurements: 26 (all instruments)
    Maximum Record Length 512 min/max pts per input
    Memory 20 screens and setups
    Environmental Specifications
    Operating Temperature 0°C to 50°C
    Storage Temperature -20°C to +60°C
    Operating Altitude 3,000 m
    Safety Specifications
    Electrical Safety 600 V CAT III (EN61010-1)
    Mechanical and General Specifications
    Size 232 x 115 x 50 mm
    Weight 1.2 kg
    Warranty 3-years on main instrument
    1-year on accessories
    Battery Life 7 hrs using NiMH
    RS232/USB Interface Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC
 
Downloads

Product Attachments

View FileFluke 120 Series Datasheet    Size: (1.38 MB)

YOU MAY ALSO LIKE