A universal input is provided for the process value signal. A second analog input is available for heating current measurement or for an external setpoint signal. The KS 45 has two switching outputs. The universal output is configurable as a voltage or current signal, for controlling solid-state relays or as a transmitter supply signal.
Galvanic isolation is provided between inputs and outputs as well as from the supply voltage and the communication interfaces.
The controller is ideal for use in the following applications:
- Furnaces, ovens, burners and boilers
- Plastics processing
- Driers and climatic chambers
- Heat treatment plants
- Oxygen applications
Specification Product Category: Single Loop Controller Dimensions and size: 99mm x 22.5mm x 117.5mm (HxWxD), Din-Rail Mounted Connectors: Screw terminals or spring-loaded terminals Primary Input Type: Universal (TC, RTD, DC linear mA/mV) Other Inputs: External setpoint, Heating current monitoring, 2nd universal input Output Type: Relay, Logic, Continuous, Optocoupler Max. Number of Outputs: 3 Scan Time: 100 ms Control Type: 2-point (on/off), continuous PID control, or 3-point stepping Number of Programmer Segments: 4 Power Supply: 100–240VAC, 18-30V AC/DC Communications: RS485 Modbus RTU, or Via adapter (ETH-Modbus TCP, PROFIBUS, CAN-Open) Other Functions: Max.-, Min.-, Mean value, Ratio control Certifications: CE, Type tested to EN 14597 (replaces DIN 3440), cULus Software Tools: BlueControl
There are no downloads