Welcome to Contral Instrument Services

Stainless Steel ThermoData® Loggers

More Views

Stainless Steel ThermoData® Loggers

Excl. VAT: £95.00 Incl. VAT: £114.00
Contral - Official Distributor

Stainless Steel ThermaData® data logger range (293-900, 293-930, 293-931, 293-932, 293-933) - ideal for food, pharmaceutical and other high temperature applications.

  • integral USB interface for setup and download

  • high temperature range -20 to 105°C

  • food grade 316 stainless steel housing

  • operating temperature -20 to 105°C

  • Five probe lengths available



Stainless steel data-loggers that are ideal for food, pharmaceutical and other applications where a high temperature data-logger is required. The Stainless steel ThermaData® logger is housed in a waterproof, food grade 316 stainless steel case to protect the logger from corrosion, impact and moisture (IP66/67).

The ThermaData® logger software allows the user to programme the logging sample/interval rate (1 to 255 minutes), the real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes) and a 12-character user ID. The software also incorporates a password protected calibration adjustment feature that allows the user to check the calibration of loggers and make minor adjustments 0.5 °C (±3 °C).

By selecting continuous logging in the software options, it is possible to start the ThermaData® logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData® stainless steel data logger will continue recording during and after downloading the data.

Five models of the stainless steel ThermaData® loggers are available, one with with internal sensor and four with optional standard fixed probe dimensions of :

  • Ø3.3 x 50 mm probe
  • Ø4.5 to Ø3.3 mm tip x 100 mm probe
  • Ø4.5 to Ø3.3 mm tip x 150 mm probe
  • Ø4.5 to Ø3.3 mm tip x 200 mm probe

Each logger is supplied with a two metre USB lead and ThermaData® Studio software.

ThermaData® Studio PC software
The ThermaData logger is connected to a PC via the internal USB connector or a USB lead (supplied). By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The user can also set, within the software, high and low alarm values for a specific application. The information can then be analysed by zooming in, storing to disc or exporting to other software packages.

USB Connection Point:-  Simply unscrew the end cap to access the USB port. This allows the user to connect the logger to a PC and upload any data collected


Additional Information



Stainless Steel ThermaData® data logger


operating temperature

-20 to 105°C

-20 to 105°C




±1°C (±0.5°C with calibration utility)


2048 readings

sample rate

1 to 255 minutes


3.6 volt half AA lithium

battery life

3 years minimum


22.5 x 129mm (exc probe)


170 grams


Product Attachments